Click here to Skip to main content
Loading
AskARC Logo
Faculty Website Title Banner

 

Course Prerequisites

 

 

Prerequisites for each course that I teach are listed below.  Please note, that if you have completed similar work in High School, at another college, or at work, you may submit a portfolio of your work to see if the pre-requisite can be waived.  In some cases, you may be eligible to receive credit for your work based on your portfolio.  Always check with me if you feel that you are qualified to take a course but are unsure if you have met the prerequisites.

DT299 - Introduction to 3D Printing

Prerequisite: None.
Advisory: None

DT300 - Introduction to Design Resources

Prerequisite: None.
Advisory: ENGWR 102 or 103, and ENGRD 116 with a grade of "C" or better; OR ESLR 320 and ESLW 320 with a grade of "C" or better.


DT302 - Technical Documentation with CADD
 

Prerequisite: DESGN 100 (Introduction to Computer Aided Drafting and Design (CADD)) with a grade of "C" or better
Advisory: ENGWR 102 or 103, and ENGRD 116 with a grade of "C" or better; OR ESLR 320 and ESLW 320 with a grade of "C" or better.

 

DT310 - Graphical Analysis and Documentation

Prerequisite: DESGN 100 (Introduction to Computer Aided Drafting and Design (CADD)) with a grade of "C" or better
Advisory: DESGN 302 (Technical Documentation with CADD), AND ENGWR 102 or 103, and ENGRD 116 with a grade of "C" or better; OR ESLR 320 and ESLW 320 with a grade of "C" or better.

 

DT328 - Engineering Modeling and Design

Prerequisite: DESGN 100 (Introduction to Computer Aided Drafting and Design (CADD)) with a grade of "C" or better
Advisory: DESGN 320 (Three Dimensional Graphics and Design); ENGWR 102 or 103, and ENGRD 116 with a grade of "C" or better; OR ESLR 320 and ESLW 320 with a grade of "C" or better.

 

DT330 - Engineering Systems and Design

Prerequisite: DESGN 302 (Technical Documentation with CADD), and DESGN 320 (Three Dimensional Graphics and Design) and, DESGN 328 (Engineering Modeling and Design) with grades of "C" or better AND DESGN 310 (Graphic Analysis and Documentation) or ENGR 312 (Engineering Graphics) with a grade of "C" or better
Advisory: ENGWR 102 or 103, and ENGRD 116 with a grade of "C" or better; OR ESLR 320 and ESLW 320 with a grade of "C" or better.


DT350 - Surveying and Land Planning

Prerequisite: DESGN 302; AND either DESGN 300 or DESGN 320; AND either DESGN 325 or DESGN 328 or HORT 329 with grades of "C" or better.
Advisory: Eligible for ENGRD 310 or ENGRD 312 AND ENGWR 300; OR ESLR 340 AND ESLW 340.